Steady Maneuver Load Analysis

This option calculates the steady maneuver response and bearing loads due to constant base translational acceleration and turn rate. The rotating assembly is mounted in a rigid base through bearings. The base motion is described by constant accelerations, where the magnitude is commonly specified by a multiple of gravity constant, or a constant turn rate. Following example is a 2G acceleration applied for the static maneuver analysis.

Units:

Acceleration: L/T^2 (for unit systems 1 and 2: inches/sec^2, for unit system 3: m/sec^2, for unit system 4: mm/sec^2).

Turn rate: rad/sec.

For sample output, click Steady Maneuver Load Response Plot.

Dyrobes Home | Dyrobes Help Contents
Copyright © 2014-2017